| The drum is tightened by weaving triangles with the extra rope.
The more triangles, the tighter the head becomes. |
| Step 1 - Uncoil the excess rope after the last
triangle. You will be creating new triangles as you work around the
drum. |
 |
| Step 2 - From the last triangle, working in the
same direction as previous row of triangles, look at the next 2 separate
vertical ropes; verticals-1 & -2. Lay the loose rope over verticals-1
& -2. |
 |
| Step 3 - Pass the loose end backwards only under
vertical-2. |
 |
| Step 4 - Lay the loose rope over vertical-1 and
pass the loose rope back under verticals-1 & -2. If your drum
wraps right to left, as in the photos, you should be looking at a
Z pattern in the loose rope. If your drum wraps left to right, you
should see an S pattern. |
 |
| Step 5 - The object of this weave is to pull the
vertical-1 under the vertical-2. Pull down hard on the rope. This
will add a triangle to the ropes. |
 |
| Repeat this procedure moving in one direction around the drum until
the head is tightened. Then tie off your loose rope and secure it
around your drum. |
