Dulcimer, Music Stands, Bagpipe, Sitar
homemy accountcartwish listhelp
Dulcimer, Bagpipe, SitarDulcimer  |  Bagpipe  |  Sitar  | 
Dulcimer, Music Stands, Bagpipe, Sitar



Dulcimer Shofar > Lutes

Search: Advanced search

New special offers are available!   

view more offers  

 

Lutes
Lutes

Lutes

Origin of the Lute

The Lute is a chordophone. The precursor of the lute is the Middle Eastern oud (or ud), which was introduced to Spain by the Moors in the early 700’s. In Arabic, al ud means the wood. It is not hard to see that the Arabic al ud was Anglicized into lute.

There are a few major differences in these two instruments. The styles of the peg-boxes differ. The lute peg box is straight, while the oud peg box has a gentle curve. They are both at nearly right angles to the neck. The two instruments differ in the number of strings. The lute has 15 strings while the Oud has 11. The strings are set in courses of two each. In the lute the first course, the highest pitched, has only one string. While in the oud, the last course, the lowest pitched, has only one string. The number of rosette sound holes carved in the soundboards differs. The Lute has one while the oud has three. Other differences are minor.

The lute under went many functional and stylistic changes as it developed. It originally had four or fewer courses of strings and was played with a plectrum, or pick. In the 15th century an additional course of strings became common. Over the next hundred or more years the full 8 courses, or 15 strings, became standard. As the instrument gained in popularity and the music changed, the plectrums were discarded and the instrument was played by plucking with the fingers.

The 1500-1600’s was the golden age for the lute. Its mass appeal resulted in copious amounts of music being composed for the lute. Lute players were in demand and well paid. As with all golden ages this one came to an end and by the 1800's the lute was no longer in fashion.

Our Lute

The Lute Body is made with stave construction. The alternating light and dark rosewood of the body is a beautiful visual contrast to the light spruce soundboard and the dark rosewood neck. They have four fixed wooden frets on the soundboard and eight movable nylon frets on the neck. There is one intricately carved rosette sound hole in the light spruce soundboard. There are 15 strings in 8 courses. The peg box is at an acute angle to the neck. Each Lute is shipped in a vinyl hard sided case with cloth interior. DulcimerShofar also offers replacement strings and Learn To Play The Lute: Lute Lessons for the Beginner by DeGroodt.

Tuning the Lute

All stringed instruments are shipped de-tuned. This removes the tension on the neck to lessen the chances of accidental breakage during shipping.

Do not tune the lute higher than G above middle C, the bridge can be pulled off the soundboard. Please be careful. Use peg dope for smoother action.

Lute String Set

Course
String #
Note
Diameter
Material
1
1
g’
0.019”
Monofilament
2
2
d’
0.022”
Monofilament
2
3
d’
0.022”
Monofilament
3
4
a
0.027”
Monofilament
3
5
a
0.027”
Monofilament
4
6
f
0.019”
Silver Plated Wound
4
7
f
0.019”
Silver Plated Wound
5
8
c
0.024”
Monofilament
5
9
c
0.026”
Silver Plated Wound
6
10
g
0.027”
Monofilament
6
11
G
0.031”
Silver Plated Wound
7
12
f
0.029”
Monofilament
7
13
F
0.035”
Silver Plated Wound
8
14
d
0.031”
Monofilament
8
15
D
0.040”
Silver Plated Wound

How to play the Lute

DulcimerShofar offers replacement strings and Learn To Play The Lute: Lute Lessons for the Beginner by DeGroodt. The book covers the parts of the lute, holding, fingering techniques, exercises, care and more. You may also want to visit our links pages for teachers in your area and lute web pages.

Frequently Asked Questions

  1. Why did I break strings when I tried to tune my lute?
  2. Why won't my lute hold a tune?

Why did I break strings when I tried to tune my lute?

If you broke a string you are going to the wrong octave and may pull the bridge off the soundboard. Use a piano to identify the octave. Nothing is tuned above G above middle C.

Back to Top


Why won't my lute hold a tune?

Lutes have a very thin soundboard and take more time to stabilize than a guitar. It takes about a month of constant tuning for your lute to stabilize.

Back to Top

method of tuning stretches the soundboard in a very even manner. As you turn the tuning peg gently push inward to tighten the peg. The pegs are tapered and will hold more firmly as you press inward. Use a piano or electronic tuner as a reference for tuning.

Bridge pins are directly beneath the tuning pins. These bridge pins are loose in their holes. They may need to be adjusted so there is ample lift to the string on the sharpening lever for a clear tone. Push or tap bridge pins for more string lift. The sharpening levers are mounted below the bridge pins. Sharpening levers may be adjusted for fine-tuning after the soundboard achieves stability. Raising or lowering the sharpening levers makes the key sharp (i.e. C becomes C-Sharp).

Frequently Asked Questions

  1. Why wasn't my harp tuned when I received it?
  2. How do I tune my harp?
  3. Why won't my harp stay in tune?
  4. Are the harp strings placed similarly to a standard pedal harp?
  5. Does the warranty apply to blemished and repaired harps? the kits?
  6. What should I use to polish my harp?
  7. What are the strings made of?
  8. How do I change a broken string on my harp?
  9. How do I fix a bridge pin that has become loose from when a string broke?
  10. Why are some strings red and some blue?

Why wasn't my harp tuned when I received it?

There is a lot of pressure on the soundboard and framed when the harp is tuned.  To reduce the potential for shipping damage, all harps are shipped untuned.

Back to Top

How do I tune my harp?

When tuning your harp for the first time, start with the shortest string in order to get on the correct octave. You may want to tune it a half note sharp so it stays in tune longer. After the first tuning, begin with the red strings from longest to shortest. Next, tune the blue strings from longest to shortest. Finally, tune the clear strings from longest to shortest. This method of tuning stretches the soundboard in a very even manner. Push the tuning peg inward as you tighten the strings. The pegs are tapered and will hold more firmly as you press inward. Use an electronic tuner or a piano as a reference for tuning.

Back to Top

Why won't my harp stay in tune?

A new harp requires many tunings before it stabilizes.  Harps stay in tune longer and become much brighter (better sounding) with age, usually 3-4 months.

All harps have two big idiosyncrasies which nobody has been able to eliminate. A term referred to as "associated flex" means when

 




Gift Certificates | Links | Contact Us | Wholesale | Affiliate Program | Terms of Use | Privacy | Help
Copyright 2000-2004 dulcimershofar.com Inc., All rights reserved.